>

Welcome to The Mattress Underground FORUM! :cheer:
The first place to start your research is the Mattress Shopping Tutorial
Select the Search Forum tab below to gain access to answers to many mattress related questions.
Select the Ask An Expert tab below to reach out to any of our Expert Members for guidance and advice.

Welcome to The Mattress Underground FORUM! :cheer:
  • Page:
  • 1

TOPIC:

Adding Soft Latex Layer to Existing Latex Mattress 01 Feb 2017 14:26 #1

So I've had my SleepEZ mattress for nearly four years and still love it. The only issue I've had is a bought the 9 inch with a 3" firm, 3" medium and 2" soft. I've always wished I had bought the 10" with a 3" soft top layer because once everything is zipped up in the mattress cover it's firmer than I expected. It's not uncomfortable (just the opposite) but I've always wished it was a little softer.

Fast forward to now I just bought a 2" dunlop soft layer and have it on top. I don't like the feel of sleeping directly on latex so I also have a wool topper. So basically I have the existing mattress with a 2" dunlop soft layer and a wool topper over everything. This feels pretty good but I'm worried that have basically 4" of soft latex foam is going to cause back problems for not being supportive enough. I'm wondering if I should have bought a 2" medium firmness layer to replace the one in the mattress and then used the soft layer from the mattress as the topper? but then I'm worried this will be firmer than I want. hmm..

I'm not sure how to tell if the mattress is not supportive enough or to soft. I saw an article that said you could take a picture of yourself laying on it (on your side) so see if things look aligned but I really can't tell. Does anyone else have 4+ inches of soft latex foam as the top layer on their mattress? Thoughts? I have about two weeks that I can exchange this layer I just bought for something else.

Thanks, Raili

Please Log in or Create an account to join the conversation.

Adding Soft Latex Layer to Existing Latex Mattress 01 Feb 2017 16:02 #2

Hi railit,

So I've had my SleepEZ mattress for nearly four years and still love it.

I’m glad you’re still enjoying your mattress.

Fast forward to now I just bought a 2" dunlop soft layer and have it on top. I don't like the feel of sleeping directly on latex so I also have a wool topper. This feels pretty good but I'm worried that have basically 4" of soft latex foam is going to cause back problems for not being supportive enough. I'm not sure how to tell if the mattress is not supportive enough or to soft.

Only your own personal testing of the product will be able to answer that question for you. If you want to learn about the relationship between surface plushness and support, there is more about primary or "deep" support and secondary or "surface" support and their relationship to firmness and pressure relief and the "roles" of different layers in a mattress in post #2 here and in post #4 here that may also be helpful in clarifying the difference between "support" and "pressure relief" and "feel".

I saw an article that said you could take a picture of yourself laying on it (on your side) so see if things look aligned but I really can't tell.

While photos can be helpful in comparing how you look when using one configuration versus another, unless you are able to document key landmarks on your body (like in biomechanical analysis) and subsequently analyze this, it would be difficult to tell froma photo if your alignment is truly “off” unless there was an obvious deviation. You’re actually performing the best way to analyze this by trying out the product in person. If you notice more pain in the morning in your lumbar region and it takes longer for it to go away during the day, this may be an indication that there is too much surface plushness with this additional topper. There is more about diagnosing the most common symptoms (types of discomfort/ pain) that people may experience when they sleep on a mattress and the most likely (although not the only) reasons for them in post #2 here , just in case you start to experience some pains with this new combination .

Does anyone else have 4+ inches of soft latex foam as the top layer on their mattress? Thoughts?

There are many forum members who use 4” or more of plush latex on top of their mattresses, but I wouldn’t use their results or comments as any sort of a reliable guideline as to what might work for you, because this is too subjective and relative to different body types, sleeping positions, and individual preferences, sensitivities, and circumstances and you are the only one that can feel what you feel on a mattress.

Personally, I would use the topper for the entire two-week period and see how you adjust during that time frame and then make up your mind after that time if you wish to seek a firmer level of surface comfort.

I’ll be interested in learning about what you decide to do.

Phoenix
Researching for a mattress?... Be sure to read The Mattress Shopping Tutorial.
Click here for TMU Discount Codes if purchasing from Our Trusted Members.
For any mattress questions Ask An Expert on our forum

Please Log in or Create an account to join the conversation.

Last edit: by Administrator TMU. Reason: Updating link to https: status
  • Page:
  • 1
Moderators: NikkiTMU
TheMattressUndergounf
TMU
TheMattressUndergounf